Profiline outdoor clocks for standalone impulse mobaline slave operation
Profiline outdoor clocks clocks for standalone impulse mobaline slave operation

Profiline Large Outdoor Analogue Clocks
with 50, 60 and 80cm case sizes

1974 - 2008
34 years of Digital and Analogue Clocks

Profiline Large Analogue Clocks for outdoor applications
with 50, 60 and 80cm case sizes

Profiline outdoor clocks are a modular design providing a range of modern single and double sided weatherproof outdoor clocks with 50, 60 or 80cm dial sizes. The Profiline range have precision finished cases manufactured from aluminium extrusions and are built to the highest standards for simple commissioning and ease of service.

Profiline outdoor clocks are suitable for the most prestigious applications and are available with and without illumination. Impact resistant front faces are available as an extra cost option.

Five different mounting options are available for post, suspended or ceiling mounting and the clocks are available with a wide range of movements for conventional minute impulses, GPS, IRIG-B, MOBALine® , serial ASCII message synchronisation or independent battery operation.

Clocks with F, SFM, SFS or SFT movements have red seconds hands. Dials are available with either numerals or bar markers.

movements to top of page
A Minute impulse movement for 24-60V alternate polarity one minute impulses
F Minute impulse movement for 24-60V alternate polarity one minute impulses. Synchronous seconds 230v 50Hz
SAM MOBALine movement for operation as a self-setting slave or secondary clock
SFM MOBALine movement for operation as a self-setting slave or secondary clock with black hours and minutes hand and red seconds hand. Second hand moves continuously or in soft steps
SAS Clock controlled by an RS232 or RS485 serial time telegram. Self-setting movement. Requires 230V 50/60Hz power
SFS Clock controlled by an RS232 or RS485 serial time telegram. Self-setting movement. Second hand moves continuously or in soft steps. Requires 230V 50/60Hz power
SAT Clock controlled by IRIG-B, AFNOR or DCF/FSK 1KHz time code. Self-setting movement. Requires 230V 50/60Hz power.
SFT Clock controlled by IRIG-B, AFNOR or DCF/FSK 1KHz time code. Self-setting movement. Second hand moves continuously or in soft steps. Requires 230V 50/60Hz power
QU Quartz movement for independent operation. Powered by Lithium battery. Not available with second hand
GU Self-setting movement synchronised by GPS. Supplied with miniature external GPS antenna. Powered by Lithium battery. Not available with second hand
 
dial illumination to top of page
PL Profiline clock without dial illumination
PLB Profiline clock with dial illumination - requires 230v 50/60Hz power.
 
dial styles to top of page
dial styles for Profiline outdoor analogue clock analog clocks
 
options to top of page
BW Front face impact resistance to DIN 18032 part 3
 
case colours to top of page
standard The standard case finish is clear anodised
optional Other colours are available at extra cost.
 
mounting options to top of page
Profiline outdoor analogue clock analog clocks mounting options
 
order codes to top of page
PLB.A.60.315.WA.BW
PLB .A .60 .315 .WA .BW  
model
type
movement diameter dial style mounting
type
front
option
case
colour
PL
PLB

.A
.F
.SAM
.SFM
.SAS
.SFS
.SAT
.SFT
.QU
.GU
.50 = 50cm
.60 = 60cm
.80 = 80cm
.300
.315
.E
.DA
.WA
.SM
.ZM
.BW no colour = clear anodised
-RALxxxx = special colour
(at extra cost)
 

Copyright 2008 Wharton Electronics Limited. All Rights Reserved
Profiline outdoor clock, MOBALine analog slave and secondary clocks

Profiline outdoor analogue clock for standalone, impulse or MOBALine self-setting timecode operation