Profiline Quad Square Analogue Clocks for outdoor applications
with 40, 50, 60 and
80cm case sizes |
 |
Profiline Quad outdoor clocks are a modular design providing
a range of modern single and double sided weatherproof outdoor clocks with
40, 50, 60 or 80cm square dial sizes. The Profiline range
have precision finished cases manufactured from
aluminium extrusions and are built to the highest
standards for simple commissioning and ease of
service.
Profiline square outdoor clocks are suitable
for the most prestigious applications and are
available with and without illumination. Impact
resistant front faces are available as an extra cost
option.
Eight different mounting options are available for post,
suspended or ceiling mounting and the clocks are
available with a wide range of movements for conventional
minute impulses, GPS, MOBALine® or independent
battery operation.
Clocks with 'seconds' movements
have red seconds hands. Dials are available with either numerals or bar markers.
Wall mounting, ceiling suspension and post mounting kits are available for double sided clocks.
| movements |
 |
| I02 |
Minute impulse movement for 24-60V
alternate polarity one minute
impulses. |
| I06 |
Minute impulse movement for 24-60V
alternate polarity one minute
impulses with 230v ac mains synchonous red seconds hand. |
| M04 |
MOBALine movement for operation
as a self-setting slave or secondary
clock. |
| M06 |
MOBALine movement for operation
as a self-setting slave or secondary
clock with black hours and minutes
hand and red seconds hand. Second
hand moves continuously or in
soft steps. |
| Q02 |
Independant Lithium battery powered quartz movement with hours and minutes hands. |
| R51 |
GPS synchronised, Lithium battery powered, movement with hours and minutes hands. |
| |
| dial illumination |
 |
| PL0 |
Profiline square clock without dial illumination. |
| PL1 |
Profiline square clock with dial illumination - requires 230v 50/60Hz power. |
| |
| dial
styles |
 |
 |
| |
| dial cover |
 |
| .01 |
Mineral glass cover |
| .02 |
Front face impact resistance to DIN 18032 part
3 cover |
| |
| case
colours |
 |
| .0 |
The standard case finish is clear anodised |
| .RALxxxx |
RAL colours are available at extra
cost |
| |
| mounting
options |
 |
 |
| |
| order
codes |
 |
| PL1.60.Q1.R51.315.2.10.0 |
| PL1 |
.60 |
.Q1 |
.R51 |
.315 |
.2 |
.10 |
.0 |
model
type |
dial
diameter |
Version |
movement |
dial
style |
dial
cover |
mounting
type |
case
colour |
PL0 - no
illumination
PL1 -
illuminated |
.40 = 40cm
.50 = 50cm
.60 = 60cm
.80 = 80cm |
.Q1 = single
sided, square
.Q2 = double sided, square |
.I02
.I06
.M04
.M09
.Q02
.R51 |
.300
.315 |
.1
.2 |
.00
.01
.10
.20
.21
.30
.40
.50 |
.0 = clear anodised
.RALxxxx = special
colour (at extra cost) |
| |
|