4000x.05 LED wall clocks with 50mm (2") digits

led digital wall clock with 50 & 30mm - 2" & 1.2" yellow/amber digits

4010x.05.Y.S hours, minutes & seconds led digital wall clock with yellow/amber digits

4010050 digital clocks with blue, green and red digits

4200x.05.B.S, 4200x.05.G.S & 4200x.05.R.S hours and minutes led digital wall clocks with blue, green and red digit options

 20m (60ft)  more

  • The 4000x.05 range of multi-purpose led digital wall clocks and stopwatches in four or six-digit versions are a proven design providing many years of operational service in professional applications.
  • Typical applications range from hospitals to detention facilities, military and civilian command and control, broadcast studios and production areas and research and development laboratories.
  • The extensive range of case styles and time synchronisation options ensure that these clocks are suitable for many different timekeeping applications and environments.
  • Every model will operate as a multi-option stopwatch or as a programmable countdown timer controlled either by the included IR handset or user-supplied voltage free contacts.
  • The 12 or 24-hour time display uses ultra-reliable, 50mm (2") high dot matrix characters for hours and minutes with 30mm (1.2") characters for seconds. You have a choice of blue, green, red or yellow/amber digits.
  • You can select a display of time only, alternating time and temperature (requires extra cost temperature sensor) or alternating time and date.

All Wharton digital clocks have many user-selected modes of operation:

  • E and NE versions can be used in stand-alone applications using their internal time references.
  • The clock has rear connections to enable time synchronisation using one of a wide selection of time code protocols from a Wharton 5000 series master clock or suitable third party time reference.
  • You can synchronise individual clocks with a precise satellite-based atomic time reference via a control message from a Wharton 488HS series GPS or GLONASS time signal receiver.
  • N and NE versions can be controlled and synchronised to time via their 10/100Base-t Ethernet NTP connection to your existing network with accurate time information provided by a local or internet time server for simple, low-cost installation and control.

Stopwatch operation

  • Wharton 4000 series clocks have time digits freely switchable between the display of time-of-day and the display of multifunction stopwatch or countdown time.
  • The IR handset controls the stopwatch and countdown timer functions. These functions can also be controlled with an optional dedicated switch panel or by user-supplied voltage free contacts.
  • The following stopwatch and countdown timer functions are user-programmable:
    • Stopwatch display modes
    • Stopwatch display resolution
    • Stopwatch count direction
    • Stop/start and hold switch actions
    • Countdown start count
    • Using external, voltage-free, switch contacts - E and NE versions only
    • Network stopwatch mode - network versions only
  • Further information about stopwatch & countdown timer operation
  • The high-quality clock enclosures have a silver or black finish. Alternative colours or finishes are available at additional cost.
  • Base model clocks are suitable for freestanding or wall mounting using the multi-angled brackets supplied. Mounting options include cases for flush wall mounting and single or double-sided clocks with mounting supports for ceiling suspension.
  • 110-230V AC, 12 or 24V DC or PoE (Power over Ethernet) power supply options.
  • All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards.
  • Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.
model size - w x h x d weight
4010x.05 305 x 90 x 58mm  12" x 3.5 x 2.3 2.5kg  5.5lb
4200x.05 240 x 90 x 58mm  9.4" x 3.5" x 2.3" 2kg  4.4lb
sizes and weights are for .S. single-sided wall mounted clocks
order code example
4010E.05.Y.FP.UK.Silver

A - model (six digit display): 4010
B - version (non-network): E
C - display height (50mm & 30mm): .05
D - display colour (yellow/amber): Y
E - case style (flush panel) : .FP
F - power supply (UK): .UK
G - case colour (silver): .Silver
A - model code
six digit display 4010
four digit display 4200
B - version  
non-network version with enhanced features E
network version N
network + enhanced features NE
C - display height  
4010: 50mm - 2" & 30mm - 1.2" .05
4200: 50mm - 2" .05
D - display colour  
blue - please note that blue illuminated characters can appear slightly out of focus to some people due to variations in the response of the human eye to blue light and typically have a shorter practical viewing distance than red, green or yellow/amber characters. .B
green .G
red .R
yellow/amber .Y
E - case style  
surface mounting case for wall mounting .S
flush mounting case for use in a panel with rear access .FP
flush mounting case supplied with mounting box .FB
single-sided ceiling suspended case .SS
double-sided ceiling suspended case .DS
F - Power supply  
internal PSU 110-240vac 50/60Hz (standard)  
with Australian mains lead .AU
with EU mains lead .EU
with UK mains lead .UK
with US mains lead .US
24v DC power supply .24vdc
48v DC power supply .48vdc
IEEE 802.3af-2003 Class 3 .POE
G - case colour  
black .black
silver .silver
RAL or other standard case finish .RAL9010