4000x.12 Commercial digital clocks with 120mm (4.7") digits

led digital wall clock with 50 & 30mm - 2" & 1.2" yellow/amber digits

4010x.12.W.S hours, minutes & seconds led digital wall clock with white digits

4200 cgital clocks with 12cm high digits

4200x.12.G.S, 4200x.12.R.S & 4200x.12.Y.S hours & minutes led digital wall clocks with green, red and yellow/amber digit options

 60m (180ft)  more

  • Our 4000x.12 range of large multi-function commercial digital clocks and stopwatches are available with either four or six digits and built to provide many years of reliable service in commercial, industrial and similar applications.
  • Typical applications include underground and surface railway systems, warehouses and factories, power generation, large offices and other commercial facilities.
  • The 12 or 24-hour time display uses ultra-reliable, 120mm (4.7") high dot matrix characters for hours and minutes and 100mm (4") characters for seconds. You have a choice of green, red, white or yellow/amber digits.
  • The many available case and mounting styles and the extensive range of operational options ensure that these clocks are suitable for almost every detailed specification.
  • Every model will operate as a multi-option stopwatch or as a programmable countdown timer.
  • You can select to show time only, alternating time and temperature (requires extra cost temperature sensor) or alternating time and date.

All Wharton digital clocks have many user-selected modes of operation:

  • E and NE versions can be used in stand-alone applications using their internal time references.
  • Every standard digital clock has rear connections to enable time synchronisation using one of a wide selection of time code protocols from a Wharton 5000 series master clock or suitable third party time reference.
  • You can synchronise individual clocks with a precise satellite-based atomic time reference via a control message from a Wharton 488HS series GPS or GLONASS time signal receiver.
  • N and NE versions can be controlled and synchronised to time via their 10/100Base-t Ethernet NTP connection to your existing network with accurate time information provided by a local or internet time server for simple, low-cost installation and control.

Stopwatch operation

  • Wharton 4000 series clocks have time digits freely switchable between the display of time-of-day and the display of multifunction stopwatch or countdown time.
  • The IR handset controls the stopwatch and countdown timer functions. These functions can also be controlled with an optional dedicated switch panel or by user-supplied voltage free contacts.
  • The following stopwatch and countdown timer functions are user-programmable:
    • Stopwatch display modes
    • Stopwatch display resolution
    • Stopwatch count direction
    • Stop/start and hold switch actions
    • Countdown start count
    • Using external, voltage-free, switch contacts - E and NE versions only
    • Network stopwatch mode - network versions only
  • Further information about stopwatch & countdown timer operation
  • The high-quality clock enclosures have a silver or black finish. Alternative colours or finishes are available at additional cost.
  • Base model clocks are suitable for freestanding or wall mounting using the multi-angled brackets supplied. Mounting options include cases for flush wall mounting and single or double-sided clocks with mounting supports for ceiling suspension.
  • 110-230V AC, 12 or 24V DC or PoE (Power over Ethernet) power supply options.
  • All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards.
  • Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.
model size - w x h x d weight
4010x.12 670 x 180 x 58mm  26.4" x 7.1" x 2.3 3.5kg  8lb
4200x.12 480 x 180 x 58mm  18.9" x 7.1" x 2.3 3kg  6.6lb
sizes and weights are for .S. single-sided wall mounted clocks
order code example
4010E.12.Y.FP.UK.Silver

A - model (six digit display): 4010
B - version (non-network): E
C - display height (120mm & 100mm): .120
D - display colour (yellow/amber): Y
E - case style (flush panel) : .FP
F - power supply (UK): .UK
G - case colour (silver): .Silver
A - model code
six digit display 4010
four digit display 4200
B - version  
non-network version with enhanced features E
network version N
network + enhanced features NE
C - display height  
4010: 120mm - 4.7" & 100mm - 4" .12
4200: 120mm - 4.7" .12
D - display colour  
green .G
red .R
white .W
yellow/amber .Y
E - case style  
surface mounting case for wall mounting .S
flush mounting case for use in a panel with rear access .FP
flush mounting case supplied with mounting box .FB
single-sided ceiling suspended case .SS
double-sided ceiling suspended case .DS
F - Power supply  
internal PSU 110-240vac 50/60Hz (standard)  
with Australian mains lead .AU
with EU mains lead .EU
with UK mains lead .UK
with US mains lead .US
24v DC power supply .24vdc
48v DC power supply .48vdc
IEEE 802.3af-2003 Class 3 .POE
G - case colour  
black .black
silver .silver
RAL or other standard case finish .RAL9010