4010SE.12 & 4200SE.12 weatherproof digital wall clocks with 120mm (4.7") digits and robust IP65 rated cases

4010SE.12 Wharton digital clock with IP65 case for outdoor use. 120mm (4.7 inch) white digits

4010x.12.W.SE hours, minutes & seconds outdoor digital wall clock with daylight visible ultra bright digits    

Colour options for Wharton outdoor digital clocks with 12cm digits showing ultra bright red and yellow/amber digits

4200x.12.UR.S & 4200x.12.UY.S hours and minutes outdoor digital wall clocks with daylight visible ultra bright digits    

 60m (180ft)  more

  • Our outdoor range of digital clocks offers a choice of ultra-bright red, white or yellow/amber digits and has robust weatherproof, IP65 rated corrosion-resistant enclosures with surface mounting, suspended and pole mounting options.
  • Designed for extended life in adverse environmental conditions these clocks have London Transport and British Rail (PA05/03968) approvals and are suitable for use in large public areas, transportation systems and industrial and commercial facilities.
  • These clocks will also operate as a multi-option stopwatch or as a programmable countdown timer.
  • The 12 or 24-hour time display has ultra-reliable, 120mm (4.7") high digits for hours and minuter and 100mm high (4") digits for seconds indication.
  • Each clock can display time only, alternating time and temperature (requires extra cost temperature sensor) or alternating time and date.
  • We include an RC100 handset for remote time-setting, stopwatch control, operating mode and special function selection.

All Wharton digital clocks have many user-selected modes of operation:

  • E and NE versions can be used in stand-alone applications using their internal time references.
  • Every standard digital clock has rear connections to enable time synchronisation using one of a wide selection of time code protocols from a Wharton 5000 series master clock or suitable third party time reference.
  • You can synchronise individual clocks with a precise satellite-based atomic time reference via a control message from a Wharton 488HS series GPS or GLONASS time signal receiver.
  • N and NE versions can be controlled and synchronised to time via their 10/100Base-t Ethernet NTP connection to your existing network with accurate time information provided by a local or internet time server for simple, low-cost installation and control.

Stopwatch operation

  • Wharton 4000 series clocks have time digits freely switchable between the display of time-of-day and multifunction stopwatch or countdown time.
  • The standard RC100 IR handset controls the stopwatch and countdown timer functions.
  • You can also control the stopwatch functions of E and NE versions with an optional 496E dedicated switch panel or by external user-supplied voltage free contacts.
  • Multiple N or NE versions of 4000 series clocks may be operated in Network Stopwatch Mode to provide a remote readout of stopwatch or timer counts.
496E stopwatch control panel

496E switch panel - features:

  • 1G plate size 86mm x 86mm with IP65 rated sealed switches.
  • We supply the 496E panel with a 5m three core captive cable interconnection to the clock. You can extend the interconnection distance up to 20m using a 7/0.2 (0.22mm2) screened cable. Please contact technical support for longer interconnection distances.
  • Please note that you must use either the RC100 infrared remote control or the rear-mounted clock setting switches for setting the clock time or the clock and stopwatch operating modes. You cannot use the 496E panel for time or function setting.

User-programmable stopwatch and countdown timer function

  • Stopwatch display modes
  • Stopwatch display resolution
  • Stopwatch count direction
  • Stop/start and hold switch actions
  • Countdown start count

For more information about stopwatch & countdown timer operation.

  • The robust weatherproof enclosure is IP65 rated, manufactured from steel specially treated to resist corrosion and supplied with brackets for wall mounting. Single and double-sided versions with brackets for pole mounting or ceiling suspension are available.
  • The clock enclosure has a High-quality paint finish to RAL 7001 50% gloss but you can specify any standard RAl colour as an extra cost option.
  • 110-230V AC, 12 or 24V DC or PoE (Power over Ethernet) power supply options.
  • All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards. The range is approved for London Underground applications and also has Network Rail Infrastructure approval (PA05/03968).
  • Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.
model size - w x h x d weight
4010x.12.SE 751 x 240 x 123mm  29.6" x 9.4" x 4.8" 6kg - 13lb
4200x.12.SE 526 x 240 x 123mm  20.7" x 9.4" x 4.8" 5kg - 11lb
sizes and weights are for .SE single-sided wall mounted clocks
order code example
4010E.12.UY.SE.UK.RAL7001 50% gloss

A - model (six digit display): 4010
B - version (non-network): E
C - display height (120mm): .12
D - display colour (ultra bright yellow/amber): UY
E - case style (IP65 rated surface mounting) : .SE
F - front window (toughened glass): .FP
G - power supply (UK): .UK
H - case colour (RAL7001 50% gloss): .RAL7001 50% gloss
A - model code
six digit display 4010
four digit display 4200
B - version  
non-network version with enhanced features E
network version N
network + enhanced features NE
C - display height code
4010: 120mm - 4.7" & 100mm - 4" .12
4200: 120mm - 4.7" .12
D - display colour  
ulta bright red .UR
ultra bright white .W
ultra bright yellow/amber .UY
E - case style  
IP65 rated surface mounting case with brackets for wall mounting .SE
IP65 rated double-sided ceiling suspended case .DSE
IP65 rated double-sided post mounting case .DPSE
F - front window  
toughened glass T
polycarbonate P
acrilic A
G - Power supply  
internal PSU 110-240vac 50/60Hz (standard)  
with Australian mains lead .AU
with EU mains lead .EU
with UK mains lead .UK
with US mains lead .US
24v DC power supply .24vdc
48v DC power supply .48vdc
IEEE 802.3af-2003 Class 3 .POE
H - case colour  
RAL or other standard case finish .RAL7001  50% gloss