4000x.170 Large LED digital wall clocks with 170mm - (6.7") digits

• This range of large led digital wall clocks are readable at a distance of up to 80m (240 ft)
• Typical applications include large public spaces, industrial and commercial facilities, factories and warehouses.
• The range of case and mounting styles and operational options ensure that these clocks are suitable for many specialised applications.
• Every version will operate as a multi-option stopwatch or programmable count-down timer.
• The 12 or 24-hour time display uses ultra-reliable, 170mm (6.7") high digits for hours, minutes and seconds.
• You can select to show time only, alternating time and temperature (requires extra cost temperature sensor) or alternating time and date information.
• We include an RC100 handset for remote time-setting, stopwatch control, operating mode and special function selection.

All Wharton digital clocks have many user-selected modes of operation:

• E and NE versions can be used in stand-alone applications using their internal time references.
• Every standard digital clock has rear connections to enable time synchronisation using one of a wide selection of time code protocols from a Wharton 5000 series master clock or suitable third party time reference.
• You can synchronise individual clocks with a precise satellite-based atomic time reference via a control message from a Wharton 488HS series GPS or GLONASS time signal receiver.
• N and NE versions can be controlled and synchronised to time via their 10/100Base-t Ethernet NTP connection to your existing network with accurate time information provided by a local or internet time server for simple, low-cost installation and control.

Stopwatch operation

• Wharton 4000 series clocks have time digits freely switchable between the display of time-of-day and multifunction stopwatch or countdown time.
• The standard RC100 IR handset controls the stopwatch and countdown timer functions.
• You can also control the stopwatch functions of E and NE versions with an optional 496E dedicated switch panel or by external user-supplied voltage free contacts.
• Multiple N or NE versions of 4000 series clocks may be operated in Network Stopwatch Mode to provide a remote readout of stopwatch or timer counts.

496E switch panel - features:

• 1G plate size 86mm x 86mm with IP65 rated sealed switches.
• We supply the 496E panel with a 5m three core captive cable interconnection to the clock. You can extend the interconnection distance up to 20m using a 7/0.2 (0.22mm²) screened cable. Please contact technical support for longer interconnection distances.
• Please note that you must use either the RC100 infrared remote control or the rear-mounted clock setting switches for setting the clock time or the clock and stopwatch operating modes. You cannot use the 496E panel for time or function setting.

User-programmable stopwatch and countdown timer function

• Stopwatch display modes
• Stopwatch display resolution
• Stopwatch count direction
• Stop/start and hold switch actions
• Countdown start count

For more information about stopwatch & countdown timer operation.

• The high-quality clock enclosures have a silver or black finish. Alternative colours or finishes are available at additional cost.
• Base model clocks are suitable for freestanding or wall mounting using the multi-angled brackets supplied. Mounting options include cases for flush wall mounting and single or double-sided clocks with mounting supports for ceiling suspension.
• 110-230V AC, 12 or 24V DC power supply options.
• All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards.
• Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.

4740 series with 57mm high characters - order specification codes

order code example
4010N.170.Y.FP.UK.Silver A - model (six digit display): 4010 B - version (network): N C - display height (170mm): .170 D - display colour (yellow/amber): Y E - case style (flush panel) : .FP F - power supply (UK): .UK G - case colour (silver): .Silver

A - model	code
six digit display	4010
four digit display	4200
B - version
non-network version with enhanced features	E
network version	N
network + enhanced features	NE
C - display height
4010: 170mm - 6.7"	.170
4200: 170mm - 6.7"	.170
D - display colour
green	.G
red	.R
white	.W
yellow/amber	.Y
E - case style
surface mounting case for wall mounting	.S
flush mounting case for use in a panel with rear access	.FP
flush mounting case supplied with mounting box	.FB
single-sided ceiling suspended case	.SS
double-sided ceiling suspended case	.DS
F - Power supply
internal PSU 110-240vac 50/60Hz (standard)
with Australian mains lead	.AU
with EU mains lead	.EU
with UK mains lead	.UK
with US mains lead	.US
24v DC power supply	.24vdc
48v DC power supply	.48vdc
IEEE 802.3af-2003 Class 3 - not presently available on 170mm display height models	.POE
G - case colour
black	.black
silver	.silver
RAL or other standard case finish	.RAL9010