4000x.170.x.SE LED wall clocks with 170mm (6.7") digits and weatherproof IP65 rated cases for external use

Wharton weatherproof digital clock for industrial and commercial applications with 17cm (6.7 inch) high digits

4010x.170.UR.SE hours, minutes & seconds weatherproof digital wall clock with ultra bright digits    

White and ultra bright yellow/amber digit color options for Wharton weatherproof digital clock with 17cm digits

4200x.170.W.SE & 4200x.170.UY.SE hours and minutes weatherproof digital wall clocks with ultra bright digits    

 80m (240ft)  more

  • Our outdoor range of digital clocks offers a choice of ultra-bright red, white or yellow/amber digits and has robust weatherproof, IP65 rated corrosion-resistant enclosures with surface mounting, suspended and pole mounting options.
  • These clocks have an exceptional performance record in outdoor applicationsand have London Transport and British Rail (PA05/03968) approvals. Typical applications include railways and other transporation systems, large public areas and manufacturing and storage facilities.
  • These clocks will also operate as a multi-option stopwatch or as a programmable count-down timer.
  • The 12 or 24-hour time display has 170mm (6.7") high digits for hours minutes and seconds.
  • You can select a display of time only, alternating time and temperature (requires extra cost temperature sensor) or alternating time and date.
  • We include an RC100 handset for remote time-setting, stopwatch control, operating mode and special function selection.

All Wharton digital clocks have many user-selected modes of operation:

  • E and NE versions can be used in stand-alone applications using their internal time references.
  • Every standard digital clock has rear connections to enable time synchronisation using one of a wide selection of time code protocols from a Wharton 5000 series master clock or suitable third party time reference.
  • You can synchronise individual clocks with a precise satellite-based atomic time reference via a control message from a Wharton 488HS series GPS or GLONASS time signal receiver.
  • N and NE versions can be controlled and synchronised to time via their 10/100Base-t Ethernet NTP connection to your existing network with accurate time information provided by a local or internet time server for simple, low-cost installation and control.

Stopwatch operation

  • Wharton 4000 series clocks have time digits freely switchable between the display of time-of-day and multifunction stopwatch or countdown time.
  • The standard RC100 IR handset controls the stopwatch and countdown timer functions.
  • You can also control the stopwatch functions of E and NE versions with an optional 496E dedicated switch panel or by external user-supplied voltage free contacts.
  • Multiple N or NE versions of 4000 series clocks may be operated in Network Stopwatch Mode to provide a remote readout of stopwatch or timer counts.
496E stopwatch control panel

496E switch panel - features:

  • 1G plate size 86mm x 86mm with IP65 rated sealed switches.
  • We supply the 496E panel with a 5m three core captive cable interconnection to the clock. You can extend the interconnection distance up to 20m using a 7/0.2 (0.22mm2) screened cable. Please contact technical support for longer interconnection distances.
  • Please note that you must use either the RC100 infrared remote control or the rear-mounted clock setting switches for setting the clock time or the clock and stopwatch operating modes. You cannot use the 496E panel for time or function setting.

User-programmable stopwatch and countdown timer function

  • Stopwatch display modes
  • Stopwatch display resolution
  • Stopwatch count direction
  • Stop/start and hold switch actions
  • Countdown start count

For more information about stopwatch & countdown timer operation.

  • The robust weatherproof case is IP65 rated, manufactured from steel specially treated to resist corrosion and supplied with brackets for wall mounting. Single and double-sided versions with brackets for pole mounting or ceiling suspension are available..
  • The clock case has a High-quality paint finish to RAL 7001 50% gloss but you can specify any standard RAl colour as an extra cost option.
  • 110-230V AC, 12 or 24V DC power supply options.
  • All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards. The range is approved for London Underground applications and also has Network Rail Infrastructure approval (PA05/03968).
  • Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.
model size - w x h x d weight
4010x.170SE 1046 x 320 x 123mm  41.2" x 12.6" x 4.8 13.5kg - 21lb
4200x.170SE 761 x 320 x 123mm  30" x 12.6" x 4.8" 9.5kg - 21lb
sizes and weights are for .S. single-sided wall mounted clocks
order code example
4010E.170.UY.SEP.UK.RAL7001 50% gloss

A - model (six digit display): 4010
B - version (non-network): E
C - display height (170mm): .170
D - display colour (ultra bright yellow/amber): UY
E - case style (IP65 rated surface mounting) : .SE
F - front window (polycarbonate): P
G - power supply (UK): .UK
H - case colour (RAL7001 50% gloss): .RAL7001 50% gloss
A - model code
six digit display 4010
four digit display 4200
B - version  
non-network version with enhanced features E
network version N
network + enhanced features NE
C - display height  
4010: 170mm - 6.7" .170
4200: 170mm - 6.7" .170
D - display colour  
ulta bright red .UR
ultra bright white .W
ultra bright yellow/amber .UY
E - case style  
IP65 rated surface mounting case with brackets for wall mounting .SE
IP65 rated double-sided ceiling suspended case .DSE
IP65 rated double-sided post mounting case .DPSE
F - front window  
toughened glass T
polycarbonate P
acrilic A
G - Power supply  
internal PSU 110-240vac 50/60Hz (standard)  
with Australian mains lead .AU
with EU mains lead .EU
with UK mains lead .UK
with US mains lead .US
24v DC power supply .24vdc
48v DC power supply .48vdc
IEEE 802.3af-2003 Class 3 - not presently available on 170mm display height models .POE
H - case colour  
RAL or other standard case finish .RAL7001  50% gloss