4010x.220.SE & 4200x.220.SE large outdoor digital clocks with 220mm (8.7") digits and weatherproof cases

Wharton large outdoor digital clock with ultra bright 220mm yellow/amber digits

4010x.05.Y.S hours, minutes & seconds led digital wall clock with yellow/amber digits

Wharton digital clocks with IP65 environment proof cases for external applications

4200x.220.UR.SE and 4200x.220.W.SE hours & minutes led digital wall clocks with daylight visible red and white digits

100m (30ft)  more

  • The 4000xSE.220 range is our largest range of weatherproofed digital clocks for outdoor or demanding environmental applications and offers a choice of ultra-bright red, white or yellow/amber digits.
  • These clocks have robust weatherproof, IP65 rated corrosion-resistant enclosures with surface mounting, suspended and pole mounting options.
  • This range of digital clocks has an exceptional performance record in outdoor applications and have London Transport and British Rail (PA05/03968) approvals. Typical applications include railway and other transportation systems, large public areas and manufacturing and storage facilities.
  • These clocks will also operate as a multi-option stopwatch or as a programmable countdown timer.
  • The 12 or 24-hour time display has 220mm (8.7") high digits for hours and minutes with 170mm (6.7") for seconds.
  • You can select a display of time only, alternating time and temperature (requires extra cost temperature sensor) or alternating time and date.

All Wharton digital clocks have many user-selected modes of operation:

  • E and NE versions can be used in stand-alone applications using their internal time references.
  • Every standard digital clock has rear connections to enable time synchronisation using one of a wide selection of time code protocols from a Wharton 5000 series master clock or suitable third party time reference.
  • You can synchronise individual clocks with a precise satellite-based atomic time reference via a control message from a Wharton 488HS series GPS or GLONASS time signal receiver.
  • N and NE versions can be controlled and synchronised to time via their 10/100Base-t Ethernet NTP connection to your existing network with accurate time information provided by a local or internet time server for simple, low-cost installation and control.

Stopwatch operation

  • Wharton 4000 series digital clocks have time digits freely switchable between the display of time-of-day and the display of multifunction stopwatch or countdown time.
  • The stopwatch and countdown timer functions are controlled by the IR handset supplied, by an optional dedicated switch panel or by user-supplied voltage free contacts.
  • The following stopwatch and countdown timer functions are user programmable:
    • Stopwatch display modes
    • Stopwatch display resolution
    • Stopwatch count direction
    • Stop/start and hold switch actions
    • Countdown start count
    • Using external, voltage free, switch contacts - E and NE versions only
    • Network stopwatch mode - network versions only
  • Further information about stopwatch & countdown timer operation
  • The high-quality clock enclosures have a black, silver or special order finish. Case type and colour information.
  • Base model clocks are suitable for freestanding or wall mounting using the multi-angled brackets supplied. Mounting options include cases for flush wall mounting and single or double-sided clocks with mounting supports for ceiling suspension.
  • 110-230V AC, 12 or 24V DC or PoE (Power over Ethernet) power supply options.
  • All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards.
  • Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.
model size - w x h x d weight
4010x.220SE 1166 x 370 x 123mm  45.9" x 14.6" x 4.8" 17kg - 37lb
4200x.220SE 960 x 370 x 123mm  37.8" x 14.6" x 4.8" 15kg - 33lb
sizes and weights are for .S. single-sided wall mounted clocks
order code example
4010N.220.UR.SET.UK.RAL7001 50% gloss

A - model (six digit display): 4010
B - version (network): N
C - display height (220mm): .220
D - display colour (ultra bright red): UR
E - case style (IP65 rated surface mounting) : .SE
F - front window (toughened glass): .FP
G - power supply (UK): .UK
H - case colour (RAL7001 50% gloss): .RAL7001 50% gloss
A - model code
six digit display 4010
four digit display 4200
B - version  
non-network version with enhanced features E
network version N
network + enhanced features NE
C - display height  
4010: 220mm & 170mm - 8.7" & 6.7" .220
4200: 220mm - 8.7" .220
D - display colour  
ulta bright red .UR
ultra bright white .W
ultra bright yellow/amber .UY
E - case style  
IP65 rated surface mounting case with brackets for wall mounting .SE
IP65 rated double-sided ceiling suspended case .DSE
IP65 rated double-sided post mounting case .DPSE
F - front window  
toughened glass T
polycarbonate P
acrilic A
G - Power supply  
internal PSU 110-240vac 50/60Hz (standard)  
with Australian mains lead .AU
with EU mains lead .EU
with UK mains lead .UK
with US mains lead .US
24v DC power supply .24vdc
48v DC power supply .48vdc
IEEE 802.3af-2003 Class 3 - not presently available on 170mm display height models .POE
H - case colour  
RAL or other standard case finish .RAL7001  50% gloss