Digital clock specifications
- return to product page

Feature Version
  E N NE
Non-network version with enhanced features.    
Network version.    
Network version with enhanced features.    
12 or 24 hour time display. with 4 digits (4200x) or 6 digits (4010x) and optional multiple time and date display formats with user selectable alternating modes. User selectable automaticseasonal time changes.
‘Set Once’ world time zone configuration enabling each digital clock to support all international time zones.
Wireless IR remote control for configuration and multifunction stopwatch operation.
Battery backup for maintaining timekeeping during periods of disconnection.
High visibility LED display with both automatic and manual brightness adjustment.
Alternating or static temperature display when used with optional temperature sensor.  
Multiple non-ethernet external synchronisation and control modes.Optional interface cards for futher inteligent input codes and coded outputs.  
10/100 Base-T Ethernet interface.  
Automatic synchronisation with remote NTP network timeservers across a TCP/IP Ethernet network.  
Remote configuration, management and software update across the Ethernet TCP/IP network using Wharton cMon software.  
Fully automatic configuration support when used with DHCP server supporting option 42.  
PoE (Power over Ethernet) Midspan and Endspan support - please confirm availability for the required version prior to ordering.  
100-240V 50-60Hz AC mains and 24V DC power options available.
External synchronisation modes available as standard: version
  E N NE
Wharton w482 multi time zone time code.  
MB serial and MobaLine time codes.  
Automatic synchronisation with remote NTP network timeservers across a TCP/IP Ethernet network.  
The following external synchronisation modes require an internal interface card: version
  option code E N NE
Alternate and single polarity 12-48v dc impulses 4040.P  
4040.E - EBU/SMPTE (LTC) interface 4040.E  
1 KHz AM coded IRIG-B/Afnor NFS 87 500 time codes 4040.I  
RS232 coded signal in one of six formats 4040.2  
RS485 coded signal in one of six formats. 4040.4  
 
The clock may be synchronized using one of the following optional radio time code receivers: version
  option code E N NE
DCF77 484.03  
MSF 484.02  
GPS 488.HS3-GPS  
Glonass 488.HS3-GLONASS  
Local synchronisation output : version
  E N NE
The local synchronisation output enables the clock to act as a master to up to ten other 4000 series clocks displaying either time-of-day or stopwatch time using a simple single cable pair.  

4000 series clocks are manufactured from aluminium extrusion and sheet in a range of case styles and high quality finishes to suit the most demanding applications.

Case colours order code   order code
Black anodising - no cost option   Silver anodising - no cost option  
.black standard brushed silver anodising .silver
Blue anodising - extra cost option   Bronze anodising - extra cost option  
.blue .bronze
Gold anodising - extra cost option   Green anodising - extra cost option  
.gold .green
Red anodising - extra cost option      
.red    
Painted to RAL colour white - extra cost option Painted to custom RAL colour - extra cost option
.RAL9010
50% gloss
substitute RAL colour code
for xxxx in order code
.RALxxxx
Case type order code
Surface mounting case with adjustable brackets for wall mounting. .S
Flush mounting case supplied with clamps for use in a panel with rear access. .FP
Flush mounting case supplied with mounting box. .FB
Single sided ceiling suspended case with support for a drop of up to 200cm .SS
Double sided ceiling suspended case with support for a drop of up to 200cm .DS
Environment
  • Operating temperature: 0-50°C
  • Relative Humidity: 0% to 95% (non-condensing.)
  • Altitude: 0 to 3,000m
Timing accuracy
  • Each clock has a high quality quartz crystal oscillator - unsynchronised accuracy: 0.1 sec/day @ 20-25°C
  • When synchronised via an NTP/SNTP timeserver the clock is typically synchronised within 1-10 milliseconds of master clock timebase depending on network delay and jitter. (N and NE versions only)
  • MSF or DCF synchronisation: ±20mS of UTC when synchronised via an 484.02 (MSF) 484.03 (DCF) radio time code receiver (E and NE clock versions only).
  • GPS/GLONASS synchronisation: ±5mS of UTC when the clock is synchronised via a 488.HS3-GPS or 488.HS3-GLONASS receiver.
Electromagnetic Compatibility, Safety and RoHS2 Directives
4010N and 4200N digital clocks, when used in accordance with our recommendations, comply with the European Community Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS2 Directive 2011/65/EU and conform to the following standards:
  • EN 50121-4-2006 - Full London Underground and Network Rail Infrastucture approval (PA05/03968)
  • EN 61000-6-2:2005
  • EN 61000-6-4:2007+A1:2011
  • EN 55022:2010
  • EN55024:2010
  • EN 60950-1:2006
Stopwatch modes available using standard IR control unit: version
  E N NE
Programmable display modes
  • Display stopwatch time only
  • Display freely switchable between clock and stopwatch time
     
Programmable stopwatch count direction settings
  • Count up from zero
  • Count down from pre-programmed start-time and then stop at zero
  • Count down from pre-programmed start-time and then up through zero
  • Continuous countdown from pre-programmed start-time and then up through zero
     
Programmable start/stop and hold switch action
  • Start -stop - start - stop without hold function
  • Start - stop - start - stop with accumulative split times
  • Start - stop - start - stop with incremental split times
  • Start - stop - start stop, alternate hold actions display incremental split time and rejoins accumulating count
     
Programmable stopwatch display resolution
  • Mode A for 4010 and 4900 models
    - stopwatch shows Minutes, Seconds and 1/100th Seconds - 00:00.00
  • Mode A for 4200 models
    - stopwatch shows Minutes and Seconds - 00:00
  • Mode B for 4010 and 4900 models
    - stopwatch shows Hours, Minutes and Seconds - 00:00:00
  • Mode B for 4200 models
    - stopwatch shows Hours and Minutes - 00:00
  • Mode C for 4010 and 4900 models
    - stopwatch shows Minutes, Seconds and 1/100th Seconds - 00:00.00
    - and then Hours, Minutes and Seconds when count reaches one hour
  • Mode C for 4200 models
    - stopwatch shows Minutes and Seconds - 00:00
    - and then Hours and Minutes when count reaches one hour
     
Stopwatch operation using external, voltage free, switch contacts version
  E N NE
The range of functions provided by the standard IR remote control can be achieved by the use of hard-wired, voltage free, external switch contact pairs. Please enquire for advice on specific or special applications and requirements.  
Temperature display modes available using optional remote 406 temperature sensor version
  E N NE
 
alternating date, time and temperature  
alternating time and temperature  
temperature only  
order code example   4010 N .05 .Y .FP .UK .Silver
model six digit display 4010 | | | | | |
  four digit display 4200 | | | | | |
version non-network version with enhanced features   E | | | | |
  network   N | | | | |
  network + enhanced features   NE | | | | |
display height 20mm - 0.8"     .020 | | | |
  50mm - 2"     .05 | | | |
  57mm - 2.3"     .057 | | | |
  100mm - 4"     .100 | | | |
  120mm - 4.7"     .12 | | | |
  170mm - 6.7"     .170 | | | |
  220mm - 8.7"     .220 | | | |
display colour blue       .B | | |
  green       .G | | |
  red       .R | | |
  super red (4010x.02 only)       .SR | | |
  white       .W | | |
  yellow       .Y | | |
case style Surface mounting case for wall mounting         .S | |
  flush mounting case for use in a panel with rear access         .FP | |
  flush mounting case supplied with mounting box         .FB | |
  single sided ceiling suspended case         .SS | |
  double sided ceiling suspended case         .DS | |
Power supply internal PSU 110-240vac 50/60Hz           | |
  with Australian mains lead           .AU |
  with EU mains lead           .EU |
  with UK mains lead           .UK |
  with US mains lead           .US |
  24v DC power supply           .24vdc |
  48v DC power supply           .48vdc |
  IEEE 802.3af-2003 Class 3           .POE |
case colour black             .black
  silver             .silver
  RAL or other standard case finish             .RAL9010
please refer to individual product pages to check for option availability