Outdoor digital clock specifications - return to product page

Feature Version
  E N NE
Non-network version with enhanced features.    
Network version.    
Network version with enhanced features.    
12 or 24 hour time display. with 4 digits (4200x) or 6 digits (4010x) and optional multiple time and date display format with user selectable changeover times formats. Automatic user selectable seasonal time changes.
‘Set Once’ world time zone configuration enabling each digital clock to support all international time zones
Wireless IR remote control for configuration and multifunction stopwatch operation.
Battery backup for maintaining timekeeping during periods of disconnection
High visibility LED display with both automatic and manual brightness adjustment
Alternating or static temperature display when used with optional temperature sensor  
Multiple non-Ethernet external synchronisation and control modes and optional interface cards for further intelligent input codes and coded outputs  
10/100 Base-T Ethernet interface.  
Automatic synchronisation with remote NTP network timeservers across a TCP/IP Ethernet network  
Remote configuration, management and software update across the Ethernet TCP/IP network using Wharton cMon software  
Fully automatic configuration support when used with DHCP server supporting option 42  
PoE (Power over Ethernet) Midspan and Endspan support - please confirm availability for the required version prior to ordering  
100-240V 50-60Hz AC mains and 24V DC power options available.
External synchronisation modes available as standard: version
  E N NE
Wharton w482 multi time zone time code  
MB serial and MobaLine time codes.  
Automatic synchronisation with remote NTP network timeservers across a TCP/IP Ethernet network  
The following external synchronisation modes require an external interface card: version
  option code E N NE
Alternate and single polarity 12-48v dc impulses 4040.P  
4040.E - EBU/SMPTE (LTC) interface 4040.E  
1 KHz AM coded IRIG-B/Afnor NFS 87 500 time codes 4040.I  
RS232 coded signal in one of xx formats 4040.2  
RS485 coded signal in one of XX formats. 4040.4  
 
The clock may be synchronized using one of the following optional time code receivers: version
  option code E N NE
DCF77 404.02  
MSF 484.03  
GPS 488.HS2  
GLONASS 488.HS3-Glonass  
Local synchronisation output : version
  E N NE
The local synchronisation output enables the clock to act as a master to up to ten other 4000 series clocks displaying either time-of-day or stopwatch time using a simple single cable pair.  

4000 series digital outdoor wall clocks are manufactured from steel sheet in a range of case styles and a high quality finish to suit the most demanding applications.

Case colours order code   order code
Painted to RAL colour silver grey
- no cost option
Painted to custom RAL colour
- extra cost option
.RAL7001
50% gloss
substitute RAL colour code
for xxxx in order code
RALxxxx
Case type order code
Surface mounting case with adjustable brackets for wall mounting. .SE
Double sided ceiling suspended case with support for a drop of up to 200cm .DSE
Double sided post mounting with support for a drop of up to 200cm .DPSE
window type order code
Toughened glass - standard option T
Acrylic A
Polycarbonate P
Environment
  • Operating temperature: 0-50°
  • Relative Humidity: 0% to 95% (non-condensing.)
  • Altitude: 0 to 3,000m
Timing accuracy
  • Each clock has a high quality quartz crystal oscillator - unsynchronised accuracy: 0.1 sec/day @ 20-25°C
  • When synchronised via an NTP/SNTP timeserver the clock is typically synchronised within 1-10 milliseconds of master clock timebase depending on network delay and jitter. (N and NE versions only)
  • MSF or DCF synchronisation: ±20mS of UTC when synchronised via an 484.02 (MSF) 484.03 (DCF) radio time code receiver (E and NE clock versions only).
  • GPS/GLONASS synchronisation: ±5mS of UTC when the clock is synchronised via a488.HS3-GPS or 488.HS3-GLONASS receiver.
Electromagnetic Compatibility, Safety and RoHS2 Directives
4010N and 4200N digital clocks, when used in accordance with our recommendations, comply with the European Community Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS2 Directive 2011/65/EU and conform to the following international standards:
  • EN 50121-4-2006
  • EN 61000-6-2:2005
  • EN 61000-6-4:2007+A1:2011
  • EN 55022:2010
  • EN55024:2010
  • EN 60950-1:2006
Stopwatch modes available using standard IR control unit: version
  E N NE
Programmable display modes
  • Display stopwatch time only
  • Display freely switchable between clock and stopwatch time
     
Programmable stopwatch count direction settings
  • Count up from zero
  • Count down from pre-programmed start-time and then stop at zero
  • Count down from pre-programmed start-time and then up through zero
  • Continuous countdown from pre-programmed start-time and then up through zero
     
Programmable start/stop and hold switch action
  • Start -stop - start - stop without hold function
  • Start - stop - start - stop with accumulative split times
  • Start - stop - start - stop with incremental split times
  • Start - stop - start stop, alternate hold actions display incremental split time and rejoins accumulating count
     
Programmable stopwatch display resolution
  • Mode A for 4010 models
    - stopwatch shows Minutes, Seconds and 1/100th Seconds - 00:00.00
  • Mode A for 4200 models
    - stopwatch shows Minutes and Seconds - 00:00
  • Mode B for 4010 models
    - stopwatch shows Hours, Minutes and Seconds - 00:00:00
  • Mode B for 4200 models
    - stopwatch shows Hours and Minutes - 00:00
  • Mode C for 4010 models
    - stopwatch shows Minutes, Seconds and 1/100th Seconds - 00:00.00
    - and then Hours, Minutes and Seconds when count reaches one hour
  • Mode C for 4200 models
    - stopwatch shows Minutes and Seconds - 00:00
    - and then Hours and Minutes when count reaches one hour
     
Stopwatch operation using external, voltage free, switch contacts version
  E N NE
The range of functions provided by the standard IR remote control can be achieved by the use of hard-wired, voltage free, external switch contact pairs. Please enquire for advice on specific or special applications and requirements.  
Temperature display modes available using optional remote 406 temperature sensor version
  E N NE
 
alternating date, time and temperature  
alternating time and temperature  
temperature only  
order code example 4010 N .12 .UY .SE P .UK .RAL7001
model six digit display 4010 | | | | | | |
  four digit display 4200 | | | | | | |
version non-network version with enhanced features   E | | | | | |
  network   N | | | | | |
  network + enhanced features   NE | | | | | |
display height 120mm - 4.7"     .12 | | | | |
  170mm - 6.7"     .170 | | | | |
  220mm - 8.7"     .220 | | | | |
display colour green - standard indoor brightness       .G | | | |
  red - standard indoor brightness       .R | | | |
  ultra bright red       .UR | | | |
  Ultra bright white       .W | | | |
  ultra bright yellow       .UY | | | |
case style surface mounting case for wall mounting         .SE | | |
  double sided ceiling suspended case         .DSE | | |
  double sided pole mounting case         .DPSE | | |
front window toughened glass - standard           T | |
  polycarbonate           P | |
  acrylic           A | |
power supply Internal PSU 110-240vac 50/60Hz             | |
  with Australian mains lead             .AU |
  with EU mains lead             .EU |
  with UK mains lead             .UK |
  with US mains lead             .US |
  24v DC power supply             .24vdc |
  48v DC power supply             .48vdc |
  IEEE 802.3af-2003 Class 3             .POE |
case colour silver grey               .RAL7001
Please refer to individual product pages to check for option availability