6010N.100 time and frequency monitoring control and synchronisation clocks with 100mm Digits

Additional information

Model	Single Row Display
Display Height	100mm (4")
Display Colour	Red – .R, Green – .G, Yellow / Amber – .Y, Blue – .B
Case Style	Wall Mounted Case – .S, Flush Mounting Case (for use in a panel with rear access) – .FP, Flush Mounting Case (supplied with mounting box) – .FB, Ceiling Suspended (single-sided) – .SS
Power Supply	UK Mains Lead – .UK, EU Mains Lead – .EU, Australian Mains Lead – .AU, US Mains Lead – .US
Case Colour	Black – .BLK, Silver – .SIL, RAL or other standard case finish – .RALxxxx

The 6010 frequency control clock is fitted as standard with an internal, temperature compensated, quartz crystal oscillator that provides the standard time display with a typical accuracy of better than 0.1 seconds per day.
For higher levels of accuracy you can synchronise your 6010 series clock to an external time reference:
- GPS or GLONASS derived precision time signals via a Wharton 488HS3 GPS or HS3 GLONASS time signal receiver.
- Time synchronisation via the unit’s standard 10/100Base-T Ethernet interface with a remote NTP (Network Time Protocol) time server across a TCP/IP computer network.
- Synchronisation via Wharton time code from a 5200 series master clock.
- Synchronisation via RS232/RS485 serial messages from Symmetricon XLi with Frequency and Time Module or other remote intelligent time & frequency computer equipped with an RS232/RS485 serial interface and programable message output format.
Three voltage free relay contacts rated at 30V DC 500Ma are user programable to provide simple remote signalling periodic time signals and user-selected time and frequency error states.

Function	Action
Power	Contacts are closed while power is present. Contacts open when the power supply is removed.
Error	Contacts are closed with the master clock is synchronised to an external source. Contacts open while the unit is unsynchronised.
5 seconds	100mS contact closure every 5 seconds.
1 Minute	100mS contact closure every minute.
1 hour	100mS contact closure every hour.
Programmable	100mS contact closure once per day, at a time programmable in hours and minute.
Frequency above limit	Contacts are closed when the measured frequency is above a user defined pre-set limit.
Frequency below limit	Contacts are closed when the measured frequency is below a user defined pre-set limit.
Time difference above limit	Contacts are closed when the time difference is above a user defined pre-set limit.
Time difference below limit	Contacts are closed when the time difference is below a user defined pre-set limit.

Installation

The high-quality enclosures have a silver or black finish. Alternative colours or finishes are available at additional cost.
Base model clocks are suitable for freestanding or wall mounting using the multi-angled brackets supplied. Mounting options include cases for flush wall mounting and single or double-sided clocks with mounting supports for ceiling suspension.
110-250V AC 50/60Hz power supply.
All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards.
Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.

model	Size - w x h x d	weight
6010N.100	2600 x 230 x 66mm - 102.4" x 9.1" x 2.7"	16Kg - 35lb