4790N.05 world time zone wall clock displays with 50mm (2") digits and analogue seconds markers

• The 4790N range has a unique seconds count ring around each digital zone time-zone in additional to a digital seconds read-out.
• You can specify your digital world clock with your choice of up to 15 time-zones to show the local time clearly and precisely in all of your trading regions, operational areas or centres of interest.
• The outer ring of 60 seconds markers show the seconds count in one of three selectable formats:
  • With a single dot marker at the actual analogue second's position.
  • The seconds' count is shown with a dot marker at the actual seconds' count position together with two trailing dots.
  • The seconds' count is shown as a series of accumulating dot markers from the zero seconds position.
• The 12 or 24-hour time display uses 50mm (2") high dot blue, green, red or yellow/amber digits for hours and minutes with 30mm (1.2") digits for seconds indication.
• You can specify your selected zone location labels to be below (part code 4790N/x.05.x) or above (part code 4791N/x.05.x) the zone time information and the names can be either:
  • Printed in white - lowest cost option.
  • User programmable & illuminated with either 30mm (1.2") or 50mm (2") characters.
• All versions are 10/100Base-t Ethernet NTP enabled for simple, low-cost installation and control via your existing Ethernet network.

• You can specify NIL30 & NIL50 versions with up to 10 zones to be user programmed to display two or three alternating zone times and location names on any or all zone time displays.
• Many customisable features are available at time of order including:

All Wharton time zone clocks are multi-function and can be programmed to operate as:

• A stand-alone time zone display using its internal time-base.
• As a single or networked time zone clock that is synchronised:
  • With a Wharton 5000 series or other local or remote NTP network time-server across a TCP/IP Ethernet network.
  • Via an ultra-precise time signal from a Wharton 488HS series GPS or GLONASS time code receiver
  • Via multi-zone w482 time code from a Wharton 5000 series time-server.
  • Via MB serial and MobaLine® time codes from a Moser Baer® master clock or time server.
• All versions are 10/100Base-t Ethernet NTP enabled for simple, low-cost installation and control via your existing Ethernet network.
• Remote configuration, management and software update across the Ethernet TCP/IP network using Wharton cMon® software.
• Fully automatic network configuration support when used with DHCP server supporting option 42.

• The high-quality clock enclosures have a black, silver or special order finish.
• Standard Wharton world time zone units are sutable for freestanding or wall mounting using the multi-angled brackets supplied. Mounting options include cases for flush wall mounting and single or double-sided clocks with mounting supports for ceiling suspension.
• 110-230V AC, 12 or 24V DC power supply options.
• All Wharton digital clock products are designed, manufactured and tested to International Quality and Performance Standards.
• Unrivalled free product lifetime technical support with unlimited advice and information to the original user for the life of the digital clock. Many previous models are still in service more than 15 years after first supply.

Dimensions

4790N & 4791N models with printed location names